Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
30 31 32 33 34
Suivant
size 104.27-CRAS
Angled cable clamping plate
size 77.62-CX 8 J6IM
RJ45 male crimp connector
  • 8 data contacts
    • CHC 10 C
    Covers with 4 pegs and gasket
  • For enclosures with 2 levers
    • THCC 24 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • CHCP 06
    Dust protection cover
  • For housings and hoods with 1 or 2 levers, with 2 or 4 pegs
    • size 104.62CR..SC-CR 05...
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • size 104.27-CLDL
    Polishing disc for POF and MOST contacts
    CHC 32 S
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • size 44.27-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • CRN 2
    Gaskets for ribbon cable hood
  • one slot for cable sizes 63.8 x 5.1 mm
    • CYG 06H10D
    1 branch-off T-Box coupling
  • For 2 hoods with lever and gasket "44.27" size and one housing "57.27" size
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 77.62-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 104.27mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    size 44.27-CR 20
    Single code pins for 6 codings
    CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • CHCW 06 LG
    Cover with lever
  • For enclosures with pegs
    • size 77.62-CRF
    Female double coding and guide pins, for 16 codes
    size 104.27mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • size 32.13-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • CR 16 SS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • For shielded cables, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • size 66.16 72-CRF
    Female coding and guide pin, for 72 codes
    CCSPZP
    Support for CCPZP pneumatic crimping tool
    CGC 16
    Covers for screw locking
  • Aluminium
    • size 49.16-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    CR Q12
    Plain coding pin for CQ 12 inserts
    CHC 16 G
    Covers with 2 levers
  • For hoods with 4 pegs
    • size 49.16-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 77.27mixo-CCTPADM
    Positioner inserts male contacts 10A
    CW 1 SC50
    SC duplex patch cord GL fibre G50/125 Orange
    size 57.27-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 77.27mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    CGKCP MB
    Dust protection cover for hoods high protection IP68
    size 57.27-CRF
    Female double coding and guide pins, for 16 codes
    size 49.16mixo-CCVPP
    Pneumatic foot valve
    size 77.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    CKR 65 D
    Gasket and screw kit for IP66/IP67
  • For CD 07/08 inserts
    • size 57.27-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 49.16mixo-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 57.27mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 49.16mixo-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 77.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    size 66.40-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • CZCS 15 L
    Cover for electromagnetic compatibility with pegs
  • For 1 lever enclosures
    • size 77.27mixo-CR 16 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 77.27 and Mixo frames for 4 inserts
    • size 104.62-CCVPP
    Pneumatic foot valve
    size 57.27mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5mm
    • CHC 50 S
    Covers with 4 pegs
  • For enclosures with 2 levers
    • size 32.13-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 77.27-CGCP 16 MB
    Dust protection cover for hoods high protection IP68
    size 66.16-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • AL M25DN
    Insulating black sealing plug M25
    size 77.27-COB TSFS
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support or cable clamp bands
    • size 57.27-CX 4 JF
    RJ45 female connector with 4 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CR 37 AD
    Plates for 1 D-sub insert, CZ/MZ/MZF enclosures
    Protection degree: IP65
    CCPR RN
    Replacement tip for CCES removal tool
    THCC 16 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • size 49.16-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • CX 1/2 BDF
    Adaptor female insert, 1 seat for BUS connector and 2 seats for 10 A female contacts
    Type of connection: Crimp connection
    Rated current: 10 A
    Nominal rated voltage: 50 V
    size 57.27-CCTPADF
    Positioner inserts female contacts 10A
    CRF
    Female double coding and guide pins, for 16 codes
    CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • CLC1
    Polish paper grain size 1000
    size 77.27mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • CKAG 03 C
    Cover with pegs and gasket
    size 57.27-CRAD
    Straight cable clamping plate
    CIVTP D
    Turret head for 5A D-SUB contacts
    size 77.27mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 57.27-CLC4
    Polish paper grain size 4000
    size 49.16mixo-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 77.27mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 57.27mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    size 66.40-CCTPADF
    Positioner inserts female contacts 10A
    size 77.27-CR GND
    Metal adaptor
    size 57.27mixo-CIES
    insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • size 66.40 72-CRF
    Female coding and guide pin, for 72 codes
    size 32.13-CCTPADF
    Positioner inserts female contacts 10A
    size 77.27mixo-CR 16 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 104.62-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 57.27mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 66.16-CCVPP
    Pneumatic foot valve
    size 44.27-CRM
    Male double coding and guide pins, for 16 codes
    CXTP 40 F
    Turret heads for female contacts 40A
    CHCS 06 L
    Cover for electromagnetic comptatibility with pegs
  • For 1 lever enclosures
    • size 77.62 72-CRM
    Male coding and guide pin, for 72 codes
    size 104.27mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • size 44.27-CLTE
    Cable cutter for Ø 2,3 mm max., for POF and MOST fibre optic
    size 104.62-CRAD
    Straight cable clamping plate
    size 77.27 72-CRM
    Male coding and guide pin, for 72 codes
    size 104.27mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 44.27mixo-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 104.62-CLC4
    Polish paper grain size 4000
    size 77.27-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 77.62mixo-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 57.27-CHES
    Contact holder removal tool
    size 104.27-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • size 44.27mixo-CIVTP D
    Turret head for 5A D-SUB contacts
    size 104.62mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    size 77.62mixo-CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    Montrer 30 50 100 par page
    Précédente
    30 31 32 33 34
    Suivant