Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
255 256 257 258 259
Suivant
size 57.27-CRAS
Angled cable clamping plate
size 32.13-CCW M25
Punching nut for M25 hole
7.000.900.903
Crimp tool for manual crimping of machined crimp contacts 16 mm² (AWG 6)
6000219CC
Lock nuts
  • CH 24,0 mm, 14,0 mm (h=21,0 mm)
size 49.16-CCVPP
Pneumatic foot valve
6DB015700*
additional cable retention Only for CH 24,0 mm
CRIC M3
Panel fitted insert fastening screws
size 57.27-CLDL
Polishing disc for POF and MOST contacts
AT 8 FT
RJ45/USB/LC Connectors for ATR C22
  • RJ45 coupler Cat6
    • M23power-7.010.900.102
    Brass protective cap
    • For connectors with male thread
    6000343GT
    Grommets and reductions
    • 4 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    size 49.16 72-CRF
    Female coding and guide pin, for 72 codes
    6000115KC*
    Lock nuts
    • round,7,5 mm,CH 19,0 mm
    size 21.21-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 57.27mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    7.010.9S0.703
    Brass protective cap with chain
    • For connectors with female thread
    6000339GT
    Grommets and reductions
    • 1 hole Ø 6,0 mm
    Cable diameter range: 5,5 - 7,0 mm
    CLDL
    Polishing disc for POF and MOST contacts
    size 77.27-CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    6000042LF*, **
    cable reduction suggested for silicon-rubber and ∅ ≤ 6,0 mm cables
    CKA 03 CA
    Covers, with 2 pegs
  • for male inserts
    • size 57.27mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • 7.010.900.135
    Adaptor flange for Straight Connectors
    6000087LF*
    cable reduction suggested for silicon-rubber and ∅ ≤ 7.0 mm cables
    size 49.16mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    600018200*
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    size 57.27mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 104.62-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    600022400
    Grommets and reductions
    • 5 holes Ø 3 mm
    Cable diameter range: 1,5 - 3,5 mm
    size 49.16mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    Montrer 30 50 100 par page
    Précédente
    255 256 257 258 259
    Suivant