Products

1 2

Next

size 104.27 72-CRM

Male coding and guide pin, for 72 codes

CRZ 24

24 pole closure or reduction plate

In self-extinguishing thermoplastic resin with gasket in vinil-nitrile elastomer

Protection degree: IP65

size 104.27-CR 24 FS

Grip panels for cables outside enclosures equipped with fixing screws and rings

In zinc iron, to be mounted on inserts size 104.27 and mixo frames for 6 inserts

CGC 24

Covers for screw locking

Aluminium

CHC 24 SL

Covers with 2 pegs

For enclosures with 1 lever with gasket

size 104.27-CCVPP

Pneumatic foot valve

size 104.27-CCINA

Insertion tool for insertion of the contacts into the inserts

For crimped contacts up to 0.75 mm²

size 104.27-CRAS

Angled cable clamping plate

size 104.27-CGCP 24 FX

Dust protection cover for housings high protection IP68

size 104.27-COB TSFS

Kit with 2 elements, for coupling of inserts with screw fixing centre distance

With handle for cable support or cable clamp bands

THCH 24 G

Covers with 2 thermoplastic levers and gasket

Plastic, with loop

CRN 1

Gaskets for ribbon cable hood

one slot for cable sizes 18.8 x 5.8 mm

size 104.27-CCW M25

Punching nut for M25 hole

size 104.27-CCPZ RN

"go/no go" control gauge to verify indenter closure

for 10A,16A,40A contacts

CGD 16 C

Crimp matrixes for CG contacts with 16 mm² section

size 104.27 72-CRF

Female coding and guide pin, for 72 codes

CRH 24

24 pole closure or reduction plate

In autoextinguishing thermoplastic resin with gasket in vinil-nitrile elastomer

Protection degree: IP65

CR 24 SS

Grip panels for cables outside enclosures equipped with fixing screws and rings

For shielded cables, to be mounted on inserts size 104.27 and mixo frames for 6 inserts

CGC 24 B

Cover for bayonet locking

Aluminium

CHC 24 G

Covers with 2 levers

For hoods with 4 pegs

size 104.27-CCPZPA

Crimping tool with automatic positioner

Daniels WA27FAP (inserts excluded)

size 104.27-CCPNP

"go /no go" control gauge to verify indenter closure

size 104.27-CIF 2.4

Interface for printed circuit with 6 female contacts (gold)

For up to 2,4 mm thick PCB

Type of connection: Soldering connection

Rated current: 6 A

size 104.27-CGCP 24 MB

Dust protection cover for hoods high protection IP68

size 104.27-CR 24 ST

Ground terminals for shielded cables

In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods

THCC 24 G

Covers with 2 thermoplastic levers and gasket

Plastic, with loop

CRN 2

Gaskets for ribbon cable hood

one slot for cable sizes 63.8 x 5.1 mm

CCW PD 24

Punching units for panel cut out of bulkhead mounting houdings

CGD 25 C

Crimp matrixes for CG contacts with 25 mm² section

size 104.27-CR 72

Single coding and guide pin, for 72 codes

size 104.27-CR VNTG

Screws for second earth terminal

For CD40/64, CDD 24/42/72/108, CQE, CNE,CSS, CX 8/24, CCE, CSE, CMSE, CME, CMCE, CSH inserts

size 104.27-CR SP

Supports for grip panels of cables outside enclosures

In die-cast zinc N° 2 pieces

CG 24 FL

Frame for bulkhead mounting housings

Aluminium

CHC 24 LG

Covers with 1 lever

For hoods with 2 pegs

size 104.27-CCTPACF

Positioner inserts female contacts 16A

size 104.27-CCPR RN

Replacement tip for CCES removal tool

size 104.27-CIF 2.4 A

Interface for printed circuit with 6 female contacts (silver)

For up to 2,4 mm thick PCB

Type of connection: Soldering connection

Rated current: 6 A

CBGF

Insert joining block

Made of die cast aluminium alloy to mate 2 inserts

size 104.27-CR 24 AT

Anchorages for several earth connections cables

In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods

CR 24 BPE

Galvanized brass

CRN 3

Gaskets for ribbon cable hood

one slot for cable sizes 36 x 9 mm

CGD 35 C

Crimp matrixes for CG contacts with 35 mm² section

size 104.27-CR CP

Plain coding pin for CD and CDD inserts

size 104.27-CRIC M3

Panel fitted insert fastening screws

size 104.27-CR 26 V

Short screws for grip panels of cables outside enlcosures

In zinc iron, N° 2 pieces

CHCN 24

Covers with pegs

Aluminium

C7 24 FL-N

Frames for bulkhead mounting housings

size 104.27-CCTPACM

Positioner inserts male contacts 16A

size 104.27-CCPZ MIL

Crimping tool for 10 A and 16 A contacts

Daniels AF8 model

size 104.27-CDFA 6A

6A female contacts for female inserts with terminal Ø 1mm

Type of connection: Crimp connection

Rated current: 6 A

size 104.27-CR TM-1

Metal replacement handles

To replace thermoplastic handles 2 component kit for dual lever enclosures

CR 24 ATD

Anchorages for several earth connections cables, Angled

In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods

CHCW 24

Cover with 4 pegs

For enclosures with 2 levers

CRN P

Gaskets for ribbon cable hood

not pre-drilled

CGPZ LOC

Locator for CG contacts

size 104.27-CR CPQ

Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts

size 104.27-CT APE

Support for rail mounting DIN EN 60715

For CT,CTS,CTSE

size 104.27-CR 42 V

Long screws for grip panels of cables outside enlcosures

In zinc iron, N° 2 pieces

CHCN 24 G

Covers with 2 levers

Aluminium

TCHC 24

Covers with 4 pegs

Plastic, with eyelet

size 104.27-CCTPADF

Positioner inserts female contacts 10A

size 104.27-CCTP 10

Turret heads for 10 A contacts (CDF & CDM series)

size 104.27-CDMA 6A

6A male contacts for male inserts with terminal Ø 1mm

Type of connection: Crimp connection

Rated current: 6 A

CPT 24

Temporary protection cover for transportation

For housings and hoods with 1 or 2 levers, with 2 or 4 pegs

size 104.27-CR 05 CA

Clamps for shielding cables

To be mounted on CR..ST ground terminals

CHCW 24 G

Cover with 2 levers

For enclosures with 4 pegs

CHC 24

Covers with 4 pegs

For enclosures with 2 levers with gasket

CHCS 24 G

Cover for electromagnetic compatibility with 2 levers

For enclosures with 4 pegs

CHC 24 L

Covers with 2 pegs

For enclosures with 1 lever with gasket

CPPZ C

Crimping tool for 70A/100A/200A series contacts

Basic tool mod. CEMBRE HT 45

size 104.27-CR BDE

Bridge for delta connection

With 2 female 10 A contacts, silver plated and open type crimp barrel

size 104.27-CRBF

Coupling screws

Bush for CT,CTS,CTSE inserts

CR..SSsize 104.27-CR 05...

Clamp for grip panels of cables outside enclosure

To be mounted on CR..SS anchorage

CR LN

Spare part lever for enclosures with levers

TCHC 24 S

Covers with 4 pegs

Plastic, with loop

size 104.27-CCTPADM

Positioner inserts male contacts 10A

size 104.27-CQES

Removal tools for the extraction of contacts from the insert

For 16 A contacts

size 104.27-CR 20

Single code pins for 6 codings

CPES

Pliers for uncoupling connectors

For housings and hoods with 2 levers and 4 pegs

size 104.27-CR 24 SC

Ground terminals for shielded cables and for several earth connections clams

In zinc plated iron, to be fitted on connectors in bulkhead housings, high hoods and COB series enclosures

CR 24 SCA

Ground terminals for shielded cables and for several earth connections clams

In zinc plated iron, to be fitted on connectors in bulkhead housings, high hoods and COB series enclosures

CHCR 24

Cover with 4 pegs

For housings

CHC 24 S

Covers with 4 pegs

For enclosures with 2 levers with gasket

size 104.27-CCPZP

Pneumatic crimping tool for 10A and 16A contacts

Daniels WA27F (turret excluded)

size 104.27-CR BST

Bridge for star connection

With 3 female 10 A contacts, silver plated

size 104.27-CRBM

Coupling screws

Screw pin for CD, CNE,CCE, CSE,CSH inserts

CR 24 DF

Self-centering floating frame in stainless steel

To be mounted on inserts size 104.27 and Mixo frames for 6 inserts

size 104.27-COB TCQ

Kit with 2 elements, for coupling of inserts with screw fixing centre distance

TCHC 24 G

Covers with 2 thermoplastic levers and gasket

Plastic, with loop

size 104.27-ZFU-CD

Stripping, crimping machine Zoller+Fröhlich AM-03 universal model

size 104.27-CCTP 16

turret heads for 16 A contacts (CCF & CCM series)

size 104.27-CRM

Male double coding and guide pins, for 16 codes

SDS

Kit for control equipment plate only

With Schuko socket, 16 A and 2 seats for: CR 09 AD, CR 15 AD, CR 25 AD plated

Protection degree: IP65

CHSDS

Kit for control equipment plate with enclosure

With Schuko socket, 16 A and 2 seats for: CR 09 AD, CR 15 AD, CR 25 AD plated

Protection degree: IP65

size 104.27CR..SC-CR 05...

U-bolt for cable screening

To be fitted on CR..SC anchors

CHCR 24 G

Cover with 2 levers

For hoods

CHC 24 C

Covers with 4 pegs and gasket

For enclosures with 2 levers

size 104.27-CCSPZP

Support for CCPZP pneumatic crimping tool

size 104.27-CCES

Removal tools for the extraction of contacts from the insert

For 10 A contacts

size 104.27-CRAD

Straight cable clamping plate

1 2

Next