Connectors

Products

Show 30 50 100 per page
Previous
74 75 76 77 78
Next
size 104.62-CCW M25
Punching nut for M25 hole
600012600
Grommets and reductions
  • 3 holes Ø 3,3 mm
Cable diameter range: 2,0 - 4,0 mm
CR 06 BPE
PE-jumpers
  • Galvanised brass
    • CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5 mm
    • 08-2989-000-000
    Protection cap for male panel mount connector
    • IP67, front fastened
    • 11
    Protection degree: IP67
    600012600*
    Grommets and reductions
    • 3 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 57.27-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • size 77.62mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • M23power-7.010.900.127
    Assembly tool
    600018200
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    size 49.16mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 77.27CR..SC-CR 05 CA
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • size 104.62mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • M23power-7.000.900.901
    Crimp tool for manual crimping of machined crimp contacts
    600012500
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 49.16-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    CHCR 16
    Cover with 4 pegs
  • For housings
    • size 104.62mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 57.27-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • size 77.62-CX 8 JM
    RJ45 male connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    M23-7.000.900.904
    Crimp tool for manual crimping of machined crimp contacts
    • For signal connectors
    600012700
    Grommet and reductions
    • slot 11,0 mm x 5,5 mm, Yellow
    size 32.13-CCTPACM
    Positioner inserts male contacts 16A
    CHC 16 C
    Covers with 4 pegs and gasket
  • For enclosures with 2 levers
    • size 104.62-CR GND
    Metal adaptor
    size 57.27-CBGF
    Insert joining block
  • Made of die cast aluminium alloy to mate 2 inserts
    • size 77.62mixo-CR 16 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • 6000049CC
    closure cap for TH405-406-409
    7.000.848.101
    Plastic protective cap for TWINTUS
    6000114MA
    Grommets and reductions
    • 2 holes Ø 2,0 mm
    Cable diameter range: 1,0 - 2,0 mm
    size 32.13-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 57.27-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 104.62-CR 24 ATD
    Anchorages for several earth connections cables, Angled
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 57.27-CYG 06H1010
    2 branch-off T-Box coupling
  • For 2 "44.27" size hoods with lever and gasket and 2 "57.27" size housing
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 104.27-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    600012200
    modules adapter for 3 poles version
    6000336BC
    Lock nut
    • ring for panel mounting
    CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 57.27-CR 20
    Single code pins for 6 codings
    size 77.62-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    ZX09BM
    Female cover for mini B connector
    Rated current:
    Number of contacts of range: 2 - 6
    Connector diameter: 9 mm
    Protection degree:
    CG 10 FL
    Frame for bulkhead mounting housings
  • Aluminium
    • size 104.27-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    604003900
    Lock nuts, Spiral top Ø 12.5 mm
    • CH 24,0 mm
    size 49.16-CCTPADM
    Positioner inserts male contacts 10A
    601000500
    screw ∅ 2,9 x 25,0 mm for box fixing
    CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 57.27-COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    size 77.62-CRAS
    Angled cable clamping plate
    size 104.27-CRM
    Male double coding and guide pins, for 16 codes
    6000347LA
    cable reduction suggested for silicon-rubber and ∅ ≤7.0 mm cables
    size 49.16-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • 6000219CC*
    Lock nuts
    • 14,0 mm (h= 21,0 mm), CH 24,0 mm
    CW 1 SC9
    SC duplex patch cord GL fibre E9/125 Yellow
    size 57.27mixo-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 77.62-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    6000340GT
    Grommets and reductions
    • 2 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    size 77.27-CX 8 JM
    RJ45 male connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    6000087LF*, **
    cable reduction suggested for silicon-rubber and ∅ ≤ 7,0 mm cables
    CGKCP FX
    Dust protection cover for housings high protection IP68
    size 57.27mixo-CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    size 77.62mixo-CYD 70 C
    Crimp matrixes for CY contacts section 70mm²
    M23H-7.010.900.183
    Brass protective cap
    • For connectors with female thread
    6000156LF*
    Blind reduction
    • Green
    size 49.16mixo-CCSPZP
    Support for CCPZP pneumatic crimping tool
    600024200*, **
    Grommets and reductions
    • hole Ø max 8,5 mm
    Cable diameter range: 7,0 - 9,0 mm
    CKR 65
    Gasket and screw kit for IP66/IP67
  • For CK,CQ 05, CKS inserts
    • size 57.27mixo-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    size 77.62mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • M23signal-7.010.904.102
    Stainless steel protective cap
    • For connectors with male thread
    600024200*
    Grommets and reductions
    • hole Ø max 8,5 mm
    Cable diameter range: 7,0 - 9,0 mm
    size 49.16mixo-CXTP 40 M
    Turret heads for male contacts 40A
    CHCP 16
    Dust protection cover
  • For housings and hoods with 1 or 2 levers, with 2 or 4 pegs
    • size 104.62mixo-CXTP 40 M
    Turret heads for male contacts 40A
    600013600*
    Grommets and reductions
    • 1 hole Ø 3,2 mm
    Cable diameter range: 1,5 - 4,5 mm
    size 57.27mixo-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 77.62mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    7.015.9S1.003
    Brass protective cap
    • For connectors with female thread
    • with rope
    600012600
    Grommets and reductions
    • 3 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 49.16-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 77.27-COB TCQ
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
    size 57.27-CX 8 JF
    RJ45 female connector with 8 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.62-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • 7.010.9S0.708
    Brass protective cap with chain
    • For connectors with male thread
    600013600
    Grommets and reductions
    • 1 hole Ø 3,2 mm
    Cable diameter range: 1,5 - 4,5 mm
    CZCW 15 LG
    Cover with lever
  • For enclosures with pegs
    • THCW 16 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • size 104.62-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.62-CX 02 BF
    Seat for two shielded connectors
  • Female inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    6DB015700
    additional cable retention Only for 24.0 mm
    PK-RF-1
    Polarizing key
  • Accessories RF CONNECTOR
    • Pitch/style: 2.54 mm
    PCB Mount Style: Through-hole Technology (THT)
    onrequest
    Suitable patch cable
    604001100
    Grommets and reductions
    • hole Ø 8,5 mm
    Cable diameter range: 7,5 - 9,0 mm
    size 32.13-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 57.27-CCTPACF
    Positioner inserts female contacts 16A
    size 57.27-CR 26 V
    Short screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • CHCW 32
    Cover with 4 pegs
  • For enclosures with 2 levers
    • 6DB00750C
    modules adapter for 6 poles version
    7.010.900.162
    Brass protective cap
    • For connectors with male thread
    Show 30 50 100 per page
    Previous
    74 75 76 77 78
    Next