Connectoren

Producten

Toon 30 50 100 per pagina
Vorige
27 28 29 30 31
Volgende
AT U2F
RJ45/USB/LC Connectors for ATR C22
  • USB 2.0 coupler F-F Type A
    • size 44.27mixo-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 77.27mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • size 104.62-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 66.16-CR VATG
    Screws for second earth terminal
  • For CDA/CDC inserts
    • CBGF
    Insert joining block
  • Made of die cast aluminium alloy to mate 2 inserts
    • size 44.27-CX 4 JM
    RJ45 male connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1.4 A
    Nominal rated voltage: 50 V
    size 77.27mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 104.62-CR 72
    Single coding and guide pin, for 72 codes
    size 104.27-CR 24 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 44.27-CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • size 77.27mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 104.62-COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    CHC 10 SL
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • CR 24 BPE
    PE jumpers
  • Galvanized brass
    • CGCP 06 FX
    Dust protection cover for housings high protection IP68
    size 104.62mixo-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 44.27-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    CRN 3
    Gaskets for ribbon cable hood
  • one slot for cable sizes 36 x 9 mm
    • CYG 06H0606
    2 branch-off T-Box coupling
  • For 2 "44.27" size hoods with lever and gasket and 1 "44.27" size fixing side housing and one "57.27" size housing
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 104.62mixo-CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    size 104.27mixo-CYD 70 C
    Crimp matrixes for CY contacts section 70mm²
    size 44.27-CRM
    Male double coding and guide pins, for 16 codes
    CXTP 40 F
    Turret heads for female contacts 40A
    CHCS 06 L
    Cover for electromagnetic comptatibility with pegs
  • For 1 lever enclosures
    • size 104.27mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • size 44.27-CLTE
    Cable cutter for Ø 2,3 mm max., for POF and MOST fibre optic
    size 77.27 72-CRM
    Male coding and guide pin, for 72 codes
    size 66.40-CCTPADM
    Positioner inserts male contacts 10A
    size 104.27mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 44.27mixo-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 77.27-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 66.40-CR 72
    Single coding and guide pin, for 72 codes
    size 104.62-CCW M25
    Punching nut for M25 hole
    size 104.27-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • size 44.27mixo-CIVTP D
    Turret head for 5A D-SUB contacts
    size 77.27mixo-CCTPADM
    Positioner inserts male contacts 10A
    size 66.16-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 57.27-CCW CT
    Hydraulic punching tool
    size 104.27-CX 02 BF
    Seat for two shielded connectors
  • Female inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 44.27mixo-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 77.27mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 66.16-CR 72
    Single coding and guide pin, for 72 codes
    size 104.27mixo-CX CFM
    Lock-in tabs for modular units (6units) dividable
    size 77.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    size 104.62-CCPR RN
    Replacement tip for CCES removal tool
    size 104.27-CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • size 44.27-CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.62-CRBF
    Coupling screws
  • Bush for CT,CTS,CTSE inserts
    • CG 24 FL
    Frame for bulkhead mounting housings
  • Aluminium
    • size 44.27mixo-CR 06 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 77.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.62-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • size 44.27-CCTPACM
    Positioner inserts male contacts 16A
    CHC 24 LG
    Covers with 1 lever
  • For hoods with 2 pegs
    • CR..SC-CR 05 CA
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • size 104.62mixoCY-CGD 25...
    Crimp matrixes for CY contacts section 16mm²
    size 44.27-CR BST
    Bridge for star connection
  • With 3 female 10 A contacts, silver plated
    • size 77.27-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • CHCN 06 LG
    Covers with lever
  • Aluminium
    • size 104.62mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 104.27mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • CT APE
    Support for rail mounting DIN EN 60715
  • For CT,CTS,CTSE
    • size 77.27-CCPR RN
    Replacement tip for CCES removal tool
    TCHC 06 SL
    Covers with pegs
  • With loop
    • size 77.62mixo-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • CYG 16
    Enclosures for in-line joints IP65
  • Without housings made in two halves
    • Material housing: Aluminium
    Protection degree: IP65
    size 104.62-CR TT
    Heat shrink tube for CYFA/CYMA 16 contacts or for conductor with total external ø < 10 mm
    size 49.16mixo-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 57.27-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.62mixo-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    CR 16 BPE
    PE jumpers
  • Galvanised brass
    • COB L
    Levers for coupling with metallic enclosures
  • Kit with 2 element, to be mounted instead of the standard levers to be coupled with: COB TCQ and COB..BC
    • size 77.62-CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27-CCTPADM
    Positioner inserts male contacts 10A
    size 32.13-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • CR 10 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 57.27 and Mixo frames for 3 inserts
    • size 77.62-CR 16 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 57.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 77.62-CCTPADF
    Positioner inserts female contacts 10A
    CQ 08 C
    Covers with 2 pegs
  • Thermoplastic resin cable glands
    • size 57.27-COB TSFS
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support or cable clamp bands
    • size 104.27-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 57.27-CRAS
    Angled cable clamping plate
    size 77.62-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    CHCS 10 G
    Cover for electomagnetic compatibility with lever
  • For enclosures with pegs
    • size 104.27-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 49.16-CCVPP
    Pneumatic foot valve
    size 57.27-CLDL
    Polishing disc for POF and MOST contacts
    size 77.62-CRIC M3
    Panel fitted insert fastening screws
    CRIC M3
    Panel fitted insert fastening screws
    size 104.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 49.16 72-CRF
    Female coding and guide pin, for 72 codes
    size 57.27mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    size 77.62mixo-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 21.21-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 104.27-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    size 77.27-CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CLDL
    Polishing disc for POF and MOST contacts
    Toon 30 50 100 per pagina
    Vorige
    27 28 29 30 31
    Volgende