Connectoren

Producten

Toon 30 50 100 per pagina
Vorige
55 56 57 58 59
Volgende
F621AMC00GA0300
Female panel mount connector
  • Push-on flexible
Rated current: 30 / 2 A
Number of contacts of range: 6
Connector diameter: 38,0 x 18,0 mm
Protection degree: IP67
size 57.27-CHC 10 L
Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • size 104.27-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • 604003900
    Lock nuts, Spiral top Ø 12.5 mm
    • CH 24,0 mm
    604004900
    Grommets and reductions
    • hole Ø max 14,0 mm
    CZC 25 L
    Covers, with 2 pegs
  • For 1 lever enclosures
    • 604000100
    fischer ∅ 4,0 x 20,0 mm
    CKM 03 T1
    Terminal connector for CKF 03 inserts
  • With pegs and seal, connects pole 2 with pole 3
    • Rated current: 10 A
    Nominal rated voltage: 250 V
    Locking Mecahnism: Double locking levers
    Material housing: Plastic
    Protection degree: IP44
    size 57.27-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 77.62-CRM
    Male double coding and guide pins, for 16 codes
    604004900*
    Grommets and reductions
    • hole Ø max 14,0 mm
    size 104.27 72-CRM
    Male coding and guide pin, for 72 codes
    6000346LA
    Blind reduction
    • Natural
    6000339GT
    Grommets and reductions
    • 1 hole Ø 6,0 mm
    Cable diameter range: 5,5 - 7,0 mm
    size 49.16-CCPR RN
    Replacement tip for CCES removal tool
    size 66.16-CCW M25
    Punching nut for M25 hole
    6000219CC*
    Lock nuts
    • 14,0 mm (h= 21,0 mm), CH 24,0 mm
    CW 1 SC62
    SC duplex patch cord GL fibre G62,5/125 Orange
    size 57.27mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 77.62-CLSP
    Fibre stripper for POF fibre optic
    6000090MA*
    Grommets and reductions
    • 1 hole Ø 2,0 mm
    Cable diameter range: 1,0 - 3,0 mm
    6000341GT
    Grommets and reductions
    • 2 holes Ø 5,4 mm
    Cable diameter range: 4,0 - 5,0 mm
    6000341GT
    Grommets and reductions
    • 2 holes Ø 5,4 mm
    Cable diameter range: 4,0 - 5,0 mm
    size 77.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    AT LCSM
    RJ45/USB/LC Connectors for ATR C22
  • LC-Duplex adapter SM
    • 6000156LF*, **
    blind reduction
    • green
    CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    6000084MG*
    Grommets and reductions
    • hole Ø 7,0 mm
    Cable diameter range: 7,0 - 9,0 mm
    6000156LF*
    Blind reduction
    • Green
    size 49.16mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 77.27mixo-CR 16 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 77.27 and Mixo frames for 4 inserts
    • 600024200*, **
    Grommets and reductions
    • hole Ø max 8,5 mm
    Cable diameter range: 7,0 - 9,0 mm
    CK 03 C
    Covers, with 2 pegs and gasket
  • For female inserts
    • size 57.27mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5mm
    • size 77.62mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • 6DB015700
    additional cable retention
    600024200*
    Grommets and reductions
    • hole Ø max 8,5 mm
    Cable diameter range: 7,0 - 9,0 mm
    size 49.16mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 77.27-CGCP 16 MB
    Dust protection cover for hoods high protection IP68
    size 104.62mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • 600012500*
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 77.62mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • 6000269CC*
    Lock nuts
    • 11,0 mm, CH 24,0 mm
    600012600
    Grommets and reductions
    • 3 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 49.16mixo-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 77.27-COB TSFS
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support or cable clamp bands
    • size 104.62-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • size 57.27-CX 4 JF
    RJ45 female connector with 4 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.62mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    600024500*,**
    Grommets and reductions
    • hole Ø max 11,8 mm
    Cable diameter range: 9,5 - 13,0 mm
    600013600
    Grommets and reductions
    • 1 hole Ø 3,2 mm
    Cable diameter range: 1,5 - 4,5 mm
    CZCS 15 LG
    Cover for electromagnetic compatibility with lever
  • For enclosures with pegs
    • THCC 16 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • size 77.62-CR GND
    Metal adaptor
    6DB015700
    additional cable retention Only for 24.0 mm
    600018200*
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    604004900
    Grommets and reductions
    • hole Ø max 14,0 mm
    size 32.13-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 57.27-CCTPADF
    Positioner inserts female contacts 10A
    size 104.62-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • CR..SSsize 57.27-CR 05 CA
    Clamp for grip panels of cables outside enclosure
  • To be mounted on CR..SS anchorage
    • size 77.62-CR 16 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • 6DB00750C
    modules adapter for 6 poles version
    600012500
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    6DB021900
    Closure cap for THx.387.Axx/THx.387.Exx/THx.387.Lxx
    AL M25IN
    Insulating black cable glan M25
    size 57.27-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 77.62-CCTPACM
    Positioner inserts male contacts 16A
    size 57.27-COB TSF
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support bands
    • size 104.27-CCVPP
    Pneumatic foot valve
    6DB01580C
    sealing cap with silicon belt for TH385
    600012700*
    Grommets and reductions
    • slot 11,0 mm x 5,5 mm
    size 66.16-CR VATG
    Screws for second earth terminal
  • For CDA/CDC inserts
    • 6000341GT
    Grommets and reductions
    • 2 holes Ø 5,4 mm
    Cable diameter range: 4,0 - 5,0 mm
    CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 57.27-CRAD
    Straight cable clamping plate
    size 77.62-CR BST
    Bridge for star connection
  • With 3 female 10 A contacts, silver plated
    • size 104.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • 6000219CC
    Lock nuts
    • CH 24,0 mm, 14,0 mm (h=21,0 mm)
    6000377GT
    Grommets and reductions
    • 1 hole Ø 3,4
    Cable diameter range: 2,5 - 3,5 mm
    size 49.16-CCSPZP
    Support for CCPZP pneumatic crimping tool
    CCW PD 03G
    Punching units for panel cut out of bulkhead mounting houdings
  • For CKG IP68 enclosures
    • 6DB015700*
    additional cable retention Only for CH 24,0 mm
    CX 1/2 BDM
    Adaptor male insert, 1 seat for BUS connector and 2 seats for 10A male contacts
    Type of connection: Crimp connection
    Rated current: 10 A
    Nominal rated voltage: 50 V
    size 57.27-CLC4
    Polish paper grain size 4000
    size 77.62-CR VPTG
    Screws for second earth terminal
  • For CP, CX 12/2, CX 6/36, CX 4/0, CX 4/2 inserts
    • 6000106MA*
    Grommets and reductions
    • 3 holes Ø 2,8 mm
    Cable diameter range: 2,0 -3,0 mm
    size 104.27-CRAS
    Angled cable clamping plate
    6000343GT
    Grommets and reductions
    • 4 holes Ø 3,4 mm
    Cable diameter range: 2,5 - 3,0 mm
    6000337BC
    special tool to fix the cable
    size 49.16 72-CRM
    Male coding and guide pin, for 72 codes
    size 77.27-CCW CT
    Hydraulic punching tool
    6000115KC
    Lock nuts
    • round,7,5 mm,CH 19,0 mm
    CX 4 JM
    RJ45 male connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1.4 A
    Nominal rated voltage: 50 V
    size 57.27mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    size 77.62mixo-CCTPADM
    Positioner inserts male contacts 10A
    6000085MM*
    Grommets and reductions
    • hole Ø 5,2 mm
    Cable diameter range: 5,5 - 7,0 mm
    size 104.27-CLDL
    Polishing disc for POF and MOST contacts
    6000339GT
    Grommets and reductions
    • 1 hole Ø 6,0 mm
    Cable diameter range: 5,5 - 7,0 mm
    Toon 30 50 100 per pagina
    Vorige
    55 56 57 58 59
    Volgende